Researchers at the University of Toronto Scarborough have, for the first time, turned waste cooking oil—from the deep fryers of a local McDonald’s—into a high-resolution, biodegradable 3D printing resin.
“The reasons plastics are a problem is because nature hasn’t evolved to handle human made chemicals,” said Andre Simpson, a professor at U of T Scarborough’s department of physical and environmental sciences who developed the resin in his lab.
“Because we’re using what is essentially a natural product— in this case fats from cooking oil — nature can deal with it much better.”
Simpson first became interested in the idea when he got a 3D printer about three years ago. After noting the molecules used in commercial resins were similar to fats found in cooking oils, he wondered whether one could be created using waste cooking oil.
One challenge was finding old cooking oil from a restaurant’s deep fryers to test in the lab. Despite contacting several major national fast food chains, the only one that responded was McDonald’s. The oil used in the research was from one of the hamburger chain’s Scarborough restaurants.
Simpson and his team used a straightforward one step chemical process in the lab, using approximately one liter of used cooking oil to make 420 milliliters of resin. The resin was then used to print a plastic butterfly that showed features down to 100 micrometers and was structurally and thermally stable, meaning it wouldn’t crumble or melt above room temperature.
“We found that McDonald’s waste cooking oil has excellent potential as a 3D printing resin,” said Simpson, an environmental chemist and director of the Environmental NMR Centre at U of T Scarborough.
Used cooking oil is a major global environmental problem, with commercial and household waste causing serious environmental issues, including clogged sewage lines caused by the build up of fats.
While there are commercial uses for waste cooking oil, Simpson said there’s a lack of ways to recycle it into a high value commodity such as a 3D printing resin. He added that creating a high value commodity could remove some of the financial barriers with recycling waste cooking oil since many restaurants have to pay to dispose of it.
Conventional high resolution resins can cost upwards of $525 per liter because they’re derived from fossil fuels and require several steps to produce. All but one of the chemicals used to make the resin in Simpson’s lab can be recycled, meaning it could be made for as low as $300 per tonne, which is cheaper than most plastics. It also cures solid in sunlight, opening up the possibility of pouring it as liquid and forming the structure on a work-site.
Another key advantage is biodegradability. The researchers found that burying a 3D-printed object made with their resin in soil lost 20 percent of its weight in approximately 2 weeks.
“If you bury it in soil, microbes will start to break it down because essentially it’s just fat,” Simpson said. “It’s something that microbes actually like to eat and they do a good job at breaking it down.”
—Republished from University of Toronto, written by Don Campbell